3
• Press Power on the setup remote control.
5 Press M on the setup remote control to display the setup menu.
6 Press to select AUTO INSTALL TV.
7 Press to start the automatic installation of channels.
» After the channels are installed, you can change the settings of
the channels, picture, sound, and volume.
POWER
SLEEP
SMART
GUEST
DCM
SETUP
TEXT
RECALL
CC
8
1
4 5 6
7
9
2 3
COMMUNICATION >
USE CHANNEL TABLE
YES
CURRENT RING
DIGITAL SETUP
SETUP
CABLE TUNING YES
CHANNEL INSTALL
>
CONFIGURATION
SMARTCLONE
>
>
>
RING2
LANGUAGE
ENGLISH
AUTO INSTALL TV
>
3 Standalone installation
This section describes how to install the TV channels automatically.
1 Connect the RF signal from the wall socket to the TV.
2 Plug the 2-pin power cord into the power outlet.
3 Set the switch at the side of the setup remote control to SETUP.
Note
• The setup remote control is not included in the box. Contact your Philips
authorized agent or dealer to obtain the remote control.
4 Turn the TV on.
• Press POWER at the side of the TV.
M
POWER
SLEEP
GUIDE
SMART
GUEST
DCM
SETUP
TEXT
RECALL
CC
RESET
CH
8
0
1
4 5 6
7
9
2 3
M
A/CH
++
+
_
SETUP
English
EN
