Y
our TV can detect a stereo signal
and will set itself automatically so
the stereo sound can be heard.
However, there may be occasions when
you might want to set the TV to mono.
The following steps describe how to
change the SOUND control:
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or CUR-
SOR DOWN ▼ button until the word
SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SOUND menu
features.
Press the CURSOR UP
▲ or
CURSOR DOWN ▼ button
to scroll
the Sound menu features until the word
SOUND is highlighted.
Press the CURSOR RIGHT
ᮣ
button to select MONO or STEREO.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
With STEREO selected, the television
will reproduce any stereo broadcast sig-
nal it receives. Please note that you can
force a stereo broadcast signal to
MONO, but you cannot force a mono
broadcast signal to stereo.
Remember: If stereo is not
present on a selected show the
“Sound” control cannot be set to Stereo.
On the other hand, if stereo is present
on a selected show the “sound” control
can be set to Mono.
During channel changes the screen may
indicate Mono for a moment then
change to Stereo if a stereo signal is
detected.
SMART HELP
