19
E
N
How to Use the On Screen Display (OSD)
User Presets
User Presets
Fllow the steps below to set a custom color temperature. You can make individual adjustments for each color.
Smart Help
After returning to Exit . . .
. . . to continue to User Preset 2, repeat steps 3 through 7, selecting U
SER PRESET 2.
. . . to continue to Language, turn the R
OTARY knob until LANGUAGE ICON is highlighted. Next, press the ON SCREEN DISPLAY button. Now, follow
steps e - 5 under LANGUAGE on the next page.
. . .to exit the On Screen Display completely, press the OSD button and choose either S
AVE or Don’t SAVE in setting mode, then push OSD
button to exit OSD. (See page 23 for other exit options.)
Press the OSD button.
3
To exit USER PRESET 1 , press the OSD button.
Next, press the OSD button again to return to E
XIT
window.
1
2
2
Turn the R
OTARY
knob until one of the
U
SER PRESET icons is highlighted.
Third window
4
If necessary,
turn the R
OTARY
knob until
of the U
SER
PRESETS is
highlighted.
Next, press the
OSD button to
confirm the
selection.
First, RED will be highlighted.
Next, to adjust the red,
press the OSD button again.
Then, turn the R
OTARY knob to
increase or decrease the red.
5
When done with red, press the
OSD button. G
REEN will be
highlighted. Then, turn the
R
OTARY knob to increase or
decrease the green.
When done with green, press
the OSD button. B
LUE will be
highlighted. Then, turn the
R
OTARY knob to increase or
decrease the blue.
7
You will now be back at the EXIT
window. See S
MART H
ELP below
for options.
8
6
Press the OSD button to
bring up SAVE screen.
Turn the Rotary Knob to select
Yes to save changes or No to
discard changes. Then, press the
OSD button to confirm your
choice and Exit the OSD.
9
9
