Index
IN-2
7975-A2-GB20-40
December 1998
D
data channel loopback (DCLB), 5-9, A-6
data port loopbacks, DTE initiated, A-6
data port tests, 5-7
data terminal loopback (DTLB), 5-8, A-6
dc power option, 3-2
default configuration area, 3-5
delete, Login ID, 7-4
device, messages, 6-3– 6-4
dimensions, D-1
Disconnect Time, for Telnet session, A-10, A-12
documents, related, vi
DOS, TFTP server on, 3-15
download code, 3-17
Download Failed, status message, 4-3
DSL Line Rate, 3-10
Fixed Rate, 3-14
DSL Port, LEDs, 4-10
DSLAM, defined, 1-2
DTE port tests, 5-7
DTE-initiated loopbacks, A-6
E
EER (Excessive Error Rate) , status message, 4-3
effective access level, 7-1
EIA-530A Port Interface Connector, C-5
EIA-530A-to-V.35 Cable Interface, C-10
ElasticStore, A-6
ending an ATI session, 2-9
enterprise, SNMP traps, B-3
environment requirements, D-1
error messages, line 24, 6-3
error statistics, 4-6
ESD precautions, 3-6
Excessive Error Rate (EER) Threshold, A-2
F
factory default configuration options, resetting, 7-5
factory defaults, 3-5
Failure, self-test result, 4-4
feature numbers, D-1
features, 1-2
firmware, download from server, 3-17
G
General SNMP Traps Options, A-16
H
health and status messages, 4-3
I
identity, 3-4
inactivity timeout, for Telnet session, A-9, A-12
Initial Startup and Configuration, 3-1
intended audience, v
Internal Switches, 3-6
Manual configuration, Internal Switches, 3-6
invert transmit clock, A-5
IP address
DSL peer, A-3
SNMP manager, 7-5
IP addresses, 8-1
IP addressing, example, 8-2
K
keyboard functions, 2-6
L
lamp test, 5-11
LEDs, 4-9, 4-10
Link Up, LEDs, 4-10
link-layer protocols, 8-1
linkUp and linkDown traps, B-2
local line loopback (LLB), 5-3
Login ID
access levels, 7-1
adding, 7-2
deleting, 7-4
login ID, 7-1
loopback, effect on LEDs, 4-10
LOS (Loss Of Signal), status message, 4-3
LOS alarm action, A-5
