Paradyne 5038-A1-00 Manual

next previous

Installing the POTS Splitter With an RTU

The POTS splitter connected to the RTU uses three cables with RJ11 connectors.

The three cables are installed:

H From the Local Loop to the POTS splitter (supplied cable)

H From the POTS splitter to the telephone (existing cable)

H From the POTS splitter to the RADSL RTU (cable supplied with the RTU)

" Procedure

To connect a POTS splitter to a phone and an RTU:

1. Unplug the existing cable from the local loop.

2. Plug the existing cable into the POTS splitter jack labeled PHONE.

3. Plug the end of the cable supplied with the RTU into the POTS splitter jack labeled

DSL. Plug the other end into the RTU jack labeled DSL.

4. Plug the end of the cable supplied with the POTS splitter into the POTS splitter jack

labeled LINE. Plug the other end into the line from the local loop.

98-15812

POTS Splitter

Line from

Local Loop

(Supplied Cable)

DSL

Hotwire RTU

LINE

DSL

PHONE

RJ11

Jack

PHONE

LINE DSL

(Existing Cable)