A SERVICE OF

logo

496-14952
97-15303c
Ethernet
Line
POWER
ETHERNET
DSL
Hotwire RTU
Ferrite
Choke
10
3. Place the large ferrite
choke on the Ethernet
cable as closely as possible
to the RTU. Pass the
Ethernet cable through
the ferrite choke twice,
creating a loop as shown.
4. Close the two halves
around the cable and
snap the ferrite choke
shut. Press down on the
plastic latch to secure
the ferrite choke in place
around the cable.
5. Insert the power cord’s round end into the jack labeled POWER. Attach the ferrite
choke on the power cord as closely as possible to the RTU. Pass the power cable
through the ferrite choke twice, creating a loop as shown.
98-15817
POWER
ETHERNET
DSL
Hotwire RTU
Power
Jack
Ferrite
Choke