- 13 -- 44 -
Overload Tools-
POWER Protector Headlight On-Board Cord Length Cord Reel
120V. AC (60Hz)
Yes Yes Yes 28 Ft. (8.5 m) Yes
12.0 A
Protector Almacen-
contra
Extensión amiento
Voltaje subrecargas Luz Herramientas
de cordón del cordón
120V. AC (60Hz)
Si Si Si 8,5 m (28 pi) Si
12,0 A
Protecteur Dispositif Longueur Rappel
Alimentation de surcharge
d’éclairage Accessoires
du cordon du cordon
120 V c.a. (60 Hz)
Oui Oui Oui 8,5 m (28 pi) Oui
12,0 A
FEATURE CHART
DDiiaaggrraammaa ddee ccaarraacctteerrííssttiiccaass
Tableau des caractéristiques
TO CHECK BRUSHES:
➢➢
When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE BRUSH DOWEL
➢➢
Remove POWER NOZZLE cover,
belt and agitator assembly. (See
“REMOVING BELT”).
➢➢
Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
➢➢
Replace brush dowel.
➢➢
Reassemble agitator assembly.
➢➢
To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
➢➢
Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See “REPLACING BELT”).
Brush Servicing
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or per-
sonal injury from cleaner suddenly start-
ing.
