NOTE: In order to keep cleaning
efficiency high and to prevent damage
to your vacuum cleaner, the agitator
must be cleaned every time the belt is
changed.
➢ Check and remove hair, string and
lint build-up frequently in the Power
Nozzle agitator and end cap areas.
➢ Remove any dirt or debris in the
belt path area or in the brush roller
area.
➢ Carefully remove any string or
debris located on the agitator or
end caps.
Agitator Assembly
Assemblage de l’agitateur
Ensamble del agitador
Agitator Cleaning
➢ Remove POWER NOZZLE cover.
➢ Remove the light bulb by pulling
straight out.
➢ To replace the light bulb, carefully
insert fully into slot.
➢ Only use a bulb rated 13V AC- 9
Watts.
➢ Replace POWER NOZZLE cover.
Replacing Headlight Bulb
TO CHECK BRUSHES:
➢ When brushes are worn to the
level of the base support bar,
replace the agitator.
➢ To replace agitator assembly see
BELT CHANGING, p. 40.
