Setup
- 19 -
Setting your logo
The logo can be your company, division or
name.
1
Press
{
MENU
}
.
SYSTEM SET UP
PRESS NAVI.[
(
)
]
2
Press
{<}
or
{>}
until the following is
displayed.
YOUR LOGO
PRESS SET
3
Press
{
SET
}
.
LOGO=
4
Enter your logo, up to 30 characters, using
the dial keypad. See page 20 for details.
Example: “Bill”
1. Press
{
2
}
2 times.
L
Cursor (
|
) will appear on the display.
LOGO=
||
B
2. Press
{
4
}
6 times.
LOGO=B
||
i
3. Press
{
5
}
6 times.
LOGO=Bi
||
l
4. Press
{>}
to move the cursor to the
next space and press
{
5
}
6 times.
LOGO=Bil
||
l
5
Press
{
SET
}
.
L
The next feature will be displayed.
6
Press
{
MENU
}
.
Note:
L
You can enter your logo by pressing
{+}
or
{-}
in step 4. In this case, press
{>}
to
move the cursor (see page 20 for details).
To change capital or lower-case letters
Pressing the
{#}
key will change to capital or
lower-case alternatively.
1. Press
{
2
}
2 times.
LOGO=
||
B
2. Press
{
4
}
3 times.
LOGO=B
||
I
3. Press
{#}
.
LOGO=B
||
i
4. Press
{
5
}
3 times.
LOGO=Bi
||
l
To correct a mistake
Press
{<}
or
{>}
to move the cursor to the
incorrect character, and make the correction.
To delete a character
Move the cursor to the character you want to
delete and press
{
STOP
}
.
To insert a character
1. Press
{<}
or
{>}
to move the cursor to the
position to the right of where you want to
insert the character.
2. Press
{
HANDSET MUTE
}
to insert a space
and enter the character.
Display
{SET}
{STOP}
{>}{<} {-}
{+} {MENU}
{HANDSET MUTE}
{FLASH}
(Hyphen)
(Delete)
(Insert)
