28
SN 29343138 TX-L5.E
Various Functions Common to all the Sources
DIMMER
Changing the Display
Press DISPLAY.
Each time you press DISPLAY, the screen
changes as follows:
DISPLAY
When an input source other than FM or AM is selected:
Press DISPLAY once to initiate the program format display.
Pressing the button again switches the display to the other
display.
* If the input signal does not have a program format, then this will
be skipped. The format display returns to the previous display
after the format display has lasted for about 5 seconds ( )
When FM or AM is selected as the input source:
FM/AM + Listening
mode
FM/AM frequency +
Preset no.
Input source +
Listening mode
Input source +
volume
Program format*
When an RDS station broadcasting PS information is
settled as the input source (European models only):
Press the DISPLAY once to initiate the frequency display.
Pressing the button again switches the display to the other
display.
ch
ch
FM frequency +
Preset no.*
FM + Listening mode
Program Service
Name + Preset no.
Controlling the Brightness of the
Lights on the AV Receiver
Press DIMMER.
Each press of the button changes the
brightness as follows:
→1. The display becomes less bright.
↓
2. The display is dimmed.
↓
3. The display is dimmed, and the
indicators other than the ON
indicator on the AV Receiver’s front
panel go off.
↓
4. The display becomes bright and the
indicators on the AV receiver’s front
panel turn on.
Note
If you connect the Onkyo DV-L5 or MD-2000 using z cable, these
components also changes the brightness.
* The frequency display returns to the previous display after the
frequency display has lasted for about 5 seconds ( ).
Remote
controller only
Remote
controller only
