Alteon OS Command Reference
218
The Configuration Menu BMD00007, November 2007
lacp
Displays the Link Aggregation Control Protocol Menu. To view menu options, see page 243.
failovr
Displays the Failover Configuration Menu. To view menu options, see page 245.
vlan <VLAN number (1-4095)>
Displays the VLAN Configuration Menu. To view menu options, see page 248.
pvstcomp enable|disable
Enables or disables VLAN tagging of spanning tree BPDUs. The default value is enabled.
bpdugrd enable|disable
Enables or disables BPDU guard, to avoid spanning-tree loops on ports with Port Fast Forwarding
enabled (/cfg/port x/fastfwd ena).
macnotif enable|disable
Enables or disables MAC Address Notification. With MAC Address Notification enabled, the
switch generates a syslog message when a MAC address is added or removed from the MAC
address table.
upfast enable|disable
Enables or disables Fast Uplink Convergence, which provides rapid Spanning Tree convergence to
an upstream switch during failover.
Note: When enabled, this feature increases bridge priorities to 65500 for all STGs and
path cost by 3000 for all external STP ports.
update <10-200>
Configures the station update rate. The default value is 40.
cur
Displays current Layer 2 parameters.
Table 6-28 Layer 2 Configuration Menu (/cfg/l2)
Command Syntax and Usage
