A SERVICE OF

logo

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
PART IDENTIFICATION CHART
REMOVE THIS PART IDENTIFICATION CHART AND PART LIST/
EXPLODED DRAWING. SAVE THIS PART IDENTIFICATION CHART
AND PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE.
M10 x 116mm Carriage Bolt (53)
M10 Nylon Locknut (64)
M6 Nylon Locknut (66)
M10 x 25mm Screw (56)
M6 Washer (63)
M10 x 165mm Button Head Bolt (5)
M10 x 152mm Button Head Bolt (54)
M10 x 118mm Button Head Bolt (67)
M10 x 70mm Button Head Bolt (52)
M10 x 50mm Button Head Bolt (57)
M10 x 47mm Button Head Bolt (60)
M10 x 22mm Button Head Bolt (59)
M6 x 13mm Screw (21)
M6 Nut (71)
M10 Washer (62)