RangeMax WiFi Range Extender WPN824EXT User Manual
3-12 Setup and Maintenance
v1.0, April 2008
h. Click Browse and locate the unzipped firmware image that you downloaded to your PC
(the file ends in .img or .chk).
i. Once you have selected the file, click Upload to send the software to the extender. The
upload process takes several minutes. When the software upload process is complete, the
extender restarts.
j. After the extender has restarted, select Wireless Extender Status under Management in
the main menu. Check the firmware version to verify that your extender now has the new
software installed.
Warning: Do not try to go online, turn off the extender, shut down the
computer, or do anything else to the extender until the extender
finishes restarting! When the Test light stops blinking, wait a few
seconds more before using the extender.
