A SERVICE OF

logo

(1) Attach the Attaching-monitor Part of the unit to the monitor with specific screws (4 points).
(2) Put in the arm covers to the shield plate with sliding them rightward or leftward.
4. Attach the monitor to the Arm Part.
(1) Draw the arm to one side. Connect the concave portion of the Attaching-monitor Part (below
figure A) to the salient of the Arm Part (below figure B).
NOTE
Check the Attaching-monitor Part is connected firmly.
(2) Fix with the enclosed fixing screw.
Specifications
____________________________________
Dimension (W) x (H) x (D) 150 (5.9) x 220.5 ~ 472.2 (8.7 ~ 18.6) x 445.2 ~ 645.2 (17.5 ~ 25.4) mm (inch)
Weight 4.9 kg (10.8 lbs)
Dimensions
Unit: mm (inch)
NOTE
The value within the dimensions drawing is only for reference, and range of motion differs according
to the installed condition.
(1)
(2)
(1)
(2)
Mounting Screws (4 pcs)
Arm Covers
Fixing Screw
Connect firmly
A
Concave portion of the
Attaching-monitor Part
B
Salient of the Arm Part
¯
{