English
4. ADJUSTMENT
29
Adjustment Contents
Menu Function Descriptions Adjustable range
Brightness
To set the brightness of the
screen
0 ∼ 100%
To set the color temperature
4,000 ∼ 10,000 K
in 500 K increments (including
9,300 K). Default setting is off
(normal white)
Temperature
(p.45)
NOTE
• The values shown in the Kelvin are available only as a reference tool.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature’s setting turns “OFF”.)
To set the gamma value
1.4 ∼ 3.0
Gamma (p.44)
NOTE
• If setting the gamma value, the using the monitor in the digital signal
input is recommended.
If using the monitor in the analog input signal, set the gamma value from
1.8 to 2.2.
To change the saturation
-16 ∼ 16
Setting the minimum level (-16)
turns the image to the
monochrome.
Saturation
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc.
-20 ∼ 20
Hue
NOTE
• The <Hue> adjustment may cause undisplayable color tone.
To change each color (red, green
and blue)
0 ∼ 100%
By adjusting the red, green and
blue color tones for each mode,
custom colors can be defined. The
100 % indicates unadjusted
condition. Display a white or gray
background image and adjust the
<Gain>.
Gain
NOTE
• The values shown in the percentage are available only as a reference
tool.
• Setting the <Temperature> (p45) invalidates the <Gain> adjustment.
<Gain> setting returns to the default: All the color indicates 100 %.
6 colors
To adjust <Saturation> and
<Hue> in each color (Red, Yellow,
Green, Cyan, Blue and Magenta)
Hue: -20 ∼ 20
Saturation: -16 ∼ 16
Reset
To return the color settings of the
selected mode to the default
settings
Select the “Reset”.
