A SERVICE OF

logo

English
12 2. INSTALLATION
2. INSTALLATION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings resolution
(seep. 36) and frequency in accordance with the charts below.
NOTE
When your computer and monitor support VESA DDC, the appropriate resolution
and the refresh rate are set just by plugging your display into the computer without
any manual settings.
Display mode Resolution Frequency Dot Clock
Portrait Landscape
640×480
VGA 60 Hz
720×400
VGA TEXT 70 Hz
1600×1200
VESA 60 Hz
1200×1600
Portrait Display 60 Hz
165 MHz
(Max.)
”: Supported
2-2. Cable Connection
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
Refer to the PC user's manual when connecting the monitor.
The monitor setting may need to be changed in some environment. If the monitor is
in portrait position and displayed in 8-bit monochrome, no setting is required.
For more information, refer to “2-3. Environmental Settings” (p. 15).
1. Rotate the monitor ninety degrees counter-clockwise into the portrait
position.