20
Chapter 3 Settings and Adjustments
Menu tab Setting / adjustable item PC
Video
Setting / adjustable content
Setup Backlight 0 to 100
√ √
Adjusts the brightness of the backlight.
DPMS On/Off
√ √
Switches the power saving setting
(DPMS) on or off.
The backlight turns off when the
synchronized input signal is no longer
detected.
OSD
Settings
Transparency
0 to 100
√ √
Adjusts the transparency of the
background color for the OSD menu.
OSD Timeout
(sec)
15 to 60
√ √
Adjusts the display time of the OSD
menu.
Mode Light/Dark/
Dynamic
√ √
Sets the appearance of the monitor to
light, dark, or modulated screen that
emphasizes low gradation contrast by
setting the gamma.
Up View On/Off
√ √
Switches to the most suitable gamma
setting if the screen is to be viewed
from below.
Source Scan On/Off
√ √
Switches the auto-selection of input
signal (automatically detects the
input signal and displays the screen
accordingly) on or off.
Analog RGB Calibration
√
― Adjusts the color gradation.
Input the signal data in accordance
with the displayed message.
Reset Calibration
√
― Returns the color gradation to the
default setting.
Video Aspect Normal/100% √
√
Switches the display range of the input
image (overscan).
* Select "100%" to display the input
image almost in full. (Depending on
the input signal, noise may appear
around the peripheral portions of the
screen image.)
Utilities Language English/
Deutsch
√ √
Selects the language (English/
Deutsch) for the menu.
Factory Reset
√ √
Returns the menu to the default setting.
Testpattern
√ √
Displays the Testpattern.
Infos
√ √
Displays the monitor information.
* The “Power On Time” and “Backlight
On Time” are not always “0” due
to factory inspection when you
purchase the monitor.
