Cleaning the lint filter
The lint is collected by the lint filter in
the door opening. The lint filter must be
cleaned after every program.
^
Clean the lint filter whenever the
"Check Filter/Vent" indicator comes
on.
^ Pull out the lint filter.
^
Wipe the lint off the filter with your
hand (do not use any sharp objects!)
or use a vacuum cleaner with the
nozzle attachment (supplied with the
vacuum cleaner).
^
Clean visible lint from the dryer
interior.
,
Take care when inserting the lint
filter not to hurt your fingers.
^ Insert the lint filter with the yellow
handle edge facing the drum.
Rinsing the lint filter
^ The lint filter can be rinsed with hot
water if necessary.
^
The filter must be dried thoroughly
before being returned to the dryer
door.
Dryer Care
26
