Switching on
^ Make sure the spray arms are not ob-
structed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Press the "On/Off" button (13).
The "Start/Stop" indicator light (17)
flashes and the indicator light (14) co-
mes on next to the last programme se-
lected.
Starting a programme
^
When selecting a programme, refer
to the programme chart at the end of
the operating instructions.
^
Then use the programme selector
buttons (19) to select the programme
you wish to use.
Use the % button to scroll down
through the programmes (14).
Use the $ button to scroll up through
the programmes.
The indicator light next to the selected
programme will come on.
^ Press the "Start/Stop" button (17).
The programme cycle begins. The
"Start/Stop" indicator light (17) and the
"Wash/Rinse" (14) indicator light and
the indicator light next to the
programme selected all come on.
Do not finish a programme prema
-
turely. Important programme stages
(e. g. reactivating the water softener)
could be omitted.
Operating the dishwasher
34
