A SERVICE OF

logo

Open as PDF
next previous

39
AdjustingtheMowerDeck
WARNING!
Beforeperforminganyserviceoradjustmentchecklist:
1. Engagetheparkingbrake.
2. PlacetheBladeswitchinthedisengagedposition.
3. Turnignitionswitchto“OFF”positionandremovethekey.
4. Makesurethebladesandallmovingpartshavecompletelystopped.
5. Disconnectthesparkplugwirefromallsparkplugsandplacethewirewhereitcannot
comeincontactwiththeplug.
WARNING!
Bladesaresharp.Protectyourhands
withglovesand/orwrapbladeswitha
heavyclothwhenhandling.
IMPORTANTINFORMATION
Thisprocedurewillplacethemowerinabase
measurementposition.Additionaladjustment
mayberequiredtoachievedesiredcutforthe
typeofgrassorconditionsinvolved.
8050-015
Side to side adjuster nut
Check the tire pressure before adjustment of the
mower deck. See Checking Tire Pressure in
Maintenance. Faulty mower deck adjustments will
cause an uneven mowing result.
LevelingDeck
Position the mower on a level, preferably 1.
concrete, surface.
Check the pressure in all four tires. See 2. Technical
Data section.
Rotate blade to align side to side.3.
Turn front adjuster nut(s) to level deck side to 4.
side.