A SERVICE OF

logo

4
Make sure that power to the monitor and the computer is off.
Connect the cable from the back of the monitor to the video connector
on the computer.
Attach the power cord to the monitor and plug it into an AC outlet.
The monitor is now ready for use.
Section 3 - Monitor Controls and LEDs
1.Power Switch: Press to turn the monitor on, press again to turn the
monitor off.
2.Power Indicator: A green LED indicates the monitor is fully powered on.
An amber LED indicates the monitor is in power saving mode.
3.Pincushion: Adjusts the pincushion (shape) of the display
4.Vertical-Position: Adjusts the vertical position
5.Vertical-Size: Adjusts the display height
6.Horizontal-Position: Adjusts the horizontal position
7.Horizontal-Size: Adjusts the display width.
Figure 3-1 Controls and LEDs
876534 9
1
2