More...
Enter your Access Code to
view a blocked channel.
NOTE: Remember, if you forget your
Access Code, 0,7,1,1 is the default
code or a way to reset the code when
the current access code is not known.
A
fter your personal access code has been
set (see previous page), you are now
ready to select the channels or Audio/Video
Inputs you want to block out or censor.
1
Press the Number (or CH +, –) but-
tons to select the channel you wish to
block or censor.
2
Press the MENU button on the
remote to show the on-screen menu.
3
Press the ᮣ or ■ button until the
word FEATURES is highlighted.
4
Press the ᮣᮣ button to enter the
FEATURES menu.
5
Press the ᮣ or
■
button until
SMARTLOCK is highlighted.
6
Press the ᮣᮣ button.
7
Enter the correct access code.
“XXXX” shows on the Access Code
display as you press the Number but-
tons. SmartLock menu options will be
displayed.
8
Press the ᮣ or ■ buttons until
BLOCK CHANNEL is highlighted.
9
Press the ᮣᮣ button to turn blocking
ON or OFF for that channel. When ON
is selected the channel will be blocked.
Press the CH + or – button to select
other channels you wish to block.
Repeat step 9 to block the new chan-
nel.
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is pow-
ered back ON, the previously blocked chan-
nels will be blocked again.
HELPFUL HINT
10
