Chapter 1
Product Overview
2
12 Volt Power Over Ethernet Adapter Kit
Injector’s LED
The Power LED is located on the top of the Injector.
Power (Green) The Power LED lights up when
the Injector is powered on and ready for use.
Splitter
The Splitter’s built-in cables and port are located on side
panels.
Splitter’s First Side Panel
The Power & Data IN port is located on the Injector’s first
side panel.
Power & Data IN This port allows you to connect
the Splitter to the Injector. (You will use the
included Ethernet network cable to make this
connection.)
Splitter’s Second Side Panel
The built-in Ethernet network and Power cables are
located on the Splitter’s second side panel.
Ethernet OUT The Splitter has a built-in Ethernet
network cable. You will connect this cable to the
Ethernet network port of your remotely located access
point or other network device.
Power The Splitter has a built-in power cord. You will
connect this cord to the Power port of your remotely
located access point or other network device.
Splitter’s LED
The Splitter’s LED is located on the top of the Splitter.
Power (Green) The Power LED lights up when
the Splitter is powered on and ready for use.
