Product Overview - Director
5
Director/Wireless-N Music Player with Integrated Amplifier
Wireless Home Audio
Product Overview - Director
Before You Begin
This User Guide is intended to provide details on the
product hardware, user interface, and use of the product.
For initial installation instructions, please refer to the Quick
Installation Guide included with your product.
Features
Amplifier, 50W Per Channel •
3.5 inch LCD Color Screen •
Tos-Link, S/PDIF, RCA and 3.5mm Audio Outputs •
Sub-woofer Output •
Draft-N Wireless with Internal Antennas •
Wired Speaker Spring Loaded Posts •
Optional Speakers •
Audio Formats: May be streamed in PCM or MP3, •
Uncompressed Formats: WAV or PCM, Compressed
Formats: MP3, AAC, MP2, WMA
DLNA 1.5 and UPnP Compliant •
Controlled by either the IR Remote (DMRIR500) or •
the Controller – Wireless-N Touchscreen Remote
(DMWR1000)
Docking Station for iPod interface (Docking Station for •
iPod, MCCI40 is an optional accessory)
Front Panel
My Library
Artists
Albums
Tracks
My Playlists
My Channels
Power (Blue/Orange) Pressing the Power
button toggles between Power on and
standby mode. Standby mode minimizes
the power consumed by your Director when
not in use. Standby mode allows you to
power on your unit using the remote control
or power button on the front panel.
To completely power off the Director, toggle
the Power Switch on the Back Panel.
The LED flashes blue while powering up and
connecting to the network. It will remain
solid blue once the device is connected to
the network. When the device is in standby
mode, the LED will appear orange.
WARNING: If the LED is red, there
is an issue with the device.
NOTE: Holding the Power button
for 15 seconds will restore factory
default settings.
WARNING: Restoring factory
default settings may revert to an
older version of the firmware. After
restoring the defaults, the firmware
can be updated manually or it
will be automatically updated if
autoupdates is selected.
