Impinger II – Digital Advantage Ops Manual –Dom & Int’l
13
IMPINGER II AND ADVANTAGE STACKING INSTRUCTIONS
FOR SINGLE OVEN
DO NOT USE
STANDOFFS AS A
LIFTING MEANS
FOR DOUBLE OVEN (Step 1)
CAUTION: USE EXTREME CARE SO OVEN
DOES NOT SLIP OFF STAND BEFORE
SCREWS HAVE SECURED OVEN.
1. Remove 4 screws holding top in place and
save (2 in front, 2 in rear).
FOR DOUBLE OVEN (Step 2) FOR DOUBLE OVEN (Step 3)
1. Remove door, conveyor and finger assemblies.
2. Turn unit on left side, as shown.
3. Drill holes in cover, as shown. Refer to step 3, pg. 14.
4. Assemble top of bottom unit to bottom of top unit with
4 bolts, as shown.
1. Position top unit over top of bottom unit and align
top flanges with bottom unit.
2. Replace 4 screws, as shown (2 in front, 2 in rear).
3. Replace door, conveyor and finger assemblies.
4. Stacking is complete.
