The options "a" "d" and "e" allow you to manage you list of network
devices that will receive SNMP Traps from the card. These options can
be used as a complex instruction to add a single device and designate the
Community String. For, example, entering:
"a 126.4.1.200 NewCommunity"
adds device 126.4.1.200 to the trap community list. The menu will update:
Display/Modify Trap Communities Menu
-------------------------------------
1: 126.4.1.100 MyCommunity
2: 126.4.1.200 NewCommunity
<ESC>: Cancel menu level
<a>dd <d>elete <e>dit
It is important to remember that you will often need to add a network
device to both the Communities Menu and the Trap Communities Menu
for your SNMP implementation to work as designed.
MultiLink ™ Software
The OpenComms Web Card works with MultiLink software to provide
unattended graceful operating systems shutdown. The card can be mon-
itored by MultiLink over the network, eliminating the need for serial
cables. Downloadable versions of MultiLink and information about install-
ing and configuring MultiLink software is available online at www.lie-
bert.com.
Please see Appendix A for more on MultiLink.
