A SERVICE OF

logo

Diagnostic Information 2-15
4085-001
Status Message Status Action
Disabling/Enabling
Menus
A representation of
the operator panel
when the user has
modified the Menu
Lockout printer setting
using the
Configuration Menu
Group. If the Menu
Lockout value is
changed to On (Panel
Menus=Disable), then
the Disabling
message is displayed.
If the Menu Lockout
value is changed to
Off (Panel
Menus=Enable), then
the Enabling
message is displayed.
No buttons are active
while this message is
displayed.
Flushing Buffer A representation of
the operator panel
when the printer is
flushing a print job.
The interpreter is
flushing the currently
active job until an End
Of Job is found or until
no data has been
received on the active
host interface for 5
seconds.
No buttons are active
while this message is
displayed.
Status Message Status Action
Activating Menu
Changes
The printer is being
reset to activate a
printer setting
changed in the
menus.
No buttons are active
while this message is
displayed.