62
Mac OS X version 10.1.2
and later
Step 1: Install a custom PPD file
1 Insert the drivers CD into your CD-ROM drive.
2 Click Mac OS X <language>.
For example, Mac OS X
English.
3 Double-click the installer icon for your printer to run the installer.
Step 2: Create a print queue in Print Center
1 Click Applications Utilities Print Center.
2 Click Add Printer.
3 Choose AppleTalk as your method of connection.
4 If you have a routed network, select the zone from the list. If you
don’t know which zone to select, look on the Network Setup
page under AppleTalk for Zone.
5 Select the new printer from the list, and then click Add.
Note: If you don’t know
which printer to select, look
on the Network Setup page
under the AppleTalk heading
to find the default name of
the printer.
6 Verify printer installation:
a Click Applications TextEdit.
b Choose File Print Summary. The Summary window
shows the PPD installed for your printer.
• If the PPD file displayed in the Summary window is
correct for your printer, printer setup is complete.
• If the PPD file displayed in the Summary window is not
correct for your printer, delete the print queue from Print
Center and repeat “Step 1: Install a custom PPD file” on
page 62.
