Supported paper sizes, types, and weights
The following tables provide information on standard and optional paper input sources and the types of paper they
support.
Note: To use a paper size that is unlisted, configure a Universal Paper Size.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at
http://support.lexmark.com.
Supported paper sizes
Supported paper sizes
Paper size and dimension 520‑sheet tray
2,000‑sheet
drawer
MP feeder
Manual
paper
Manual
envelope
Duplex
A4
210 x 297 mm (8.27 x 11.7 in.)
1 1,6 2,6 2,6
X
2
A5
148 x 210 mm (5.83 x 8.27 in.)
1,5
X
2,5 2,5
X
2,5
A6
105 x 148 mm (4.13 x 5.83 in.)
XX
2 2
XX
JIS B5
182 x 257 mm (7.17 x 10.1 in.)
1,6 1,6 2,6 2,6
X
2,6
Letter
216 x 279 mm (8.5 x 11 in.)
1 1,6 2,6 2,6
X
2
Legal
216 x 356 mm (8.5 x 14 in.)
1
X
2 2
X
2
Executive
184 x 267 mm (7.25 x 10.5 in.)
1,6 1,6 2,6 2,6
X
2,6
JIS B4
257 x 364 mm (10.12 x 14.33 in.)
1
X
2 2
X
2
A3
297 x 420 mm (11.69 x 16.54 in.)
1
X
2 2
X
2
SRA3
320 x 450 mm (12.6 x 17.7 in.)
7
X
2 2
X
2
1
Source supports size with size sensing.
2
Source supports size without size sensing.
3
Paper size is supported if set to metric.
4
Paper size is supported if set to US.
5
Paper size is supported if loaded in the short‑edge orientation. The short edge of the paper enters the printer first.
6
Paper size is supported if loaded in the long‑edge orientation. The long edge of the paper enters the printer first.
7
This is applicable only to the optional 520‑sheet tray.
Paper and specialty media guide 79
