A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
network name <text>
Sets the network name.
no network name
Clears the network name.
scan 2.4 ghz band disable
Disables scanning of the 2.4 GHz band for this profile.
scan 2.4 ghz band enable
Enables scanning of the 2.4 GHz band for this profile.
scan 5 ghz band disable
Disables scanning of the 5 GHz band for this profile.
scan 5 ghz band enable
Enables scanning of the 5 GHz band for this profile.
scan dfs channels disable
Disables scanning of the DFS channels (5 GHz band) for this pro-
file.
scan dfs channels enable
Enables scanning of the DFS channels (5 GHz band) for this pro-
file.
security
Switch to security level
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
state disable
Disables this profile.
state enable
Enables this profile.
topology adhoc
Sets topology to Adhoc.
topology infrastructure
Sets topology to Infrastructure.
write
Stores the current configuration in permanent memory.
email 1 (email:1) level commands
auto show statistics
Continuously displays email statistics.
cc <text>
Sets Cc addresses for email alerts.
<text> = a quoted, semicolon separated list of email addresses.
clear log
Clears all entries from the mail log.
clear mail counters
Sets the email counters to zero.
clrscrn
Clears the screen.
cp
Enters the next lower level.
default local port
Sets the local port (used to send email alerts) to random.
default priority
Sets X-Priority for email alerts to 3 (normal).
default server port
Restores the factory default port for SMTP on the server side.
email <number>
Enters the configure email level.
exit
Exits to the enable level.
from <text>
Sets the From address for email alerts.
<text> = email address to place in the From field of the email alert.
local port <number>
Sets the local port used to send email alerts.
<number> local port to use for email alerts.
message file <text>
Specifies a text file, the contents of which will be the message
body
of an email alert.
<text> = the name of a local file.
no cc
Removes the Cc addresses for email alerts.
no clear mail counters
Restores the email counters to the aggregate values.
no from
Removes the From address for email alerts.
no message file
Removes the file name, so the message body will be empty.
no overriding domain
Removes the overriding domain name option.
no reply to
Removes the Reply To address for email alerts.
no subject
Removes subject used for email alerts.
PremierWave EN Command Reference 77