Controls the amount of mid present on the drive channel.
Controls the amount of treble present on the drive channel.
Controls the amount of signal returned from the onboard effects processor.
The onboard digital effects have been custom designed by Laney to complement the LX120H with a choice of Delays,
Flange, Rotary, Octave Down, Chorus, Reverb and combinations of these. Select your chosen effect here, and control the
level with
Fancy playing along with a backing track? Connect your CD/MP3 player here.
Connect a Laney FS2 footswitch here to enable remote switching for the channel and reverb/FX. Note: Drive channel
must be enabled (via ) for channel switching with a footswitch to function.
Line out socket to connect to a recording device or another amplifier/PA etc.
When ‘on’ Indicates that power is connected to the unit and it is ready to go.
(Always switch off and disconnect the power cord when not in use)
Main power switch for the unit.
14
6
5
This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened cable.
Controls the volume level of the clean channel.
Controls the amount of bass or bottom end present on the clean channel.
Controls the amount of mid present on the clean channel.
Controls the amount of treble present on the clean channel.
Switch in to activate the overdrive ‘Crunch’ channel. When active, control the amount of distortion with and the overall
volume with
Indicates that the drive channel is active.
Controls the crunch channel gain, low down for classic rock and blues, higher up for hard rock and metal.... the higher you go
the more Extreme it gets. Use in conjunction with to get the overall level balanced how you want it.
Controls the overall level on the drive channel. Use with
eXtreme Tone Shaping. This applies a scooped mid tone shape to the drive channel and boosts certain key frequencies for a
unique sound.
Controls the amount of bass or bottom end present on the drive channel.
8
9
9
8
1
Page 6 /12 Page 7 /12
2
3
4
6
7
12
15
16
FRONT PANEL CONTROLS
Laney
OPERATING INSTRUCTIONS
Laney
OPERATING INSTRUCTIONS
1234818
6
17
7
17
18
1213141520
19
13
19
20
516
8
9
10
11
14
10
11 9
