G-16
SM-E3B SERIES WSM
G GENERAL
[6] CHECK POINT OF EVERY 150 HOURS
Replacing Oil Filter Cartridge (for Optional Depth Oil Pans)
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
• To prevent serious damage to the engine, replacement
element must be highly efficient. Use only a KUBOTA
genuine filter or its equivalent.
W1018457
[7] CHECK POINTS OF EVERY 200 HOURS
Replacing Oil Filter Cartridge (for Standard Depth Oil Pans)
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
• To prevent serious damage to the engine, replacement
element must be highly efficient. Use only a KUBOTA
genuine filter or its equivalent.
W1018643
(1) Engine Oil Filter Cartridge [a] Standard Type
[b] One-side Maintenance Type
(1) Engine Oil Filter Cartridge [a] Standard Type
[b] One-side Maintenance Type
