7-12
Using the Quick Recall (QR) Function
You can customize and save the following settings, then quickly recall them:
✔ Exposure mode (including Vari-Program)
✔ Metering system
✔ Focus area/AF mode
✔ Drive mode
✔ Flash Sync mode
✔ Exposure Compensation function
✔ Flash Output Level Compensation
✔ Auto Exposure/Flash Exposure Bracketing
You can save the settings as a group, and save up to three groups. Three identification
numbers (1 to 3) are provided for custom settings.
Saving Customized Settings for Quick Recall
1 Confirm the various camera
settings. Change as needed.
2 Press and hold the FNC button
and rotate the Main-Command
dial until the Function Set
indicator ( ) appears in the
Camera Status LCD panel and
QR and start blinking.
SET
FNC
( )
MDE
Ps
BUSY
RESET+/-
IN
