Photo Printer 4700 Series 41
8 There is a problem with the
printer.
There is a problem with
the printer or the printer
is not responding.
• Wait a few seconds and
select Retry in the error
dialog box.
• Select Cancel in the error
dialog box. Resend the job.
• Restart the printer and
resend the job.
9 A system error has
occurred.
The PC has a system
error.
• Wait a few seconds and
select Retry in the error
dialog box.
• Select Cancel in the error
dialog box. Resend the job.
• Save your work. Close all
applications. Restart the PC
and resend the job.
The PC does not have
enough memory to print
the job.
• Close all unnecessary
applications.
• Resize the image to make it
smaller.
• Save your work. Close all
applications. Restart the PC
and resend the job.
NA Usage dialog box appears
during the installation of the
EKLPT port on a
WINDOWS NT system.
You are trying to install
the EKLPT port from a
source other than the CD.
The new source has
blank spaces embedded
in the full path name of
the installation software’s
source directory.
Remove the blank spaces. For
example, replace C:\4700
Windows NT Driver with
C:\4700_Windows_
NT_Driver.
Use the CD for the
installation.
Table 2: Common Printer Driver Error Messages (Cont’d)
Error # Message Possible Causes Possible Solutions
