13
DIALLING STORED DTMF NUMBERS
1 Press the microphone
key.
•“” appears on the display.
2 Enter the desired memory location number (1 ~ 9).
• The digits stored in the selected location number appear on the display.
•To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
• If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.
“D” is used for a pause time. The pause duration is programmed by your dealer.
CLEARING STORED DTMF NUMBERS
1 Press the microphone # key.
•“” appears on the display.
2 Press the microphone # key again.
•“ ” appears on the display.
•To cancel, press any key other than 1 ~ 9.
3 Enter the memory location number (1 ~ 9) you want to clear.
• The memory location number is cleared and the display returns to normal.
REDIALLING
1 Press the microphone
key.
•“” appears on the display.
2 Press the microphone 0 key.
• The digits last dialled appear on the display.
• If there is no data in the redial memory, an error tone will sound.
•To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
Note: Switching the transceiver power OFF clears the redial memory.
