24
RECEIVING SELCALLS AND STATUS MESSAGES
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key
programmed as Monitor.
• Your dealer can program the monitor function to close again after
a specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgment signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.
• Your dealer can program the transceiver to display the received
Selcall/Status.
To respond to the call, press the PTT switch and speak into
the microphone.
