Parametric Equalizer
You can Manually set the equalizer curve by
adjusting the center frequency, gain and Q
value.
1
Adjusts the volume.
2345
Select a band to be adjusted.
6
Sets a frequency.
7
Sets a gain level.
8
Sets a Q value.
9
Store the present equalizer curve in memory, or
calls it from memory.
0
Exits the Parametric Equalizer setup and returns
to the Equalizer screen.
—
You can adjust the following frequency bands.
2
60, 80, 100, 120, 160, 200, 250 Hz
3
315, 400, 500, 630, 800, 1k Hz
4
1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k Hz
5
5k, 6.3k, 8k, 10k, 12.5k, 16k Hz
Set a gain
4
Set a center frequency
3
Band4Band1
Select a frequency band you wish to adjust
2
P-EQ
Display the Parametric Equalizer screen
1
To store the equalizer curve in memory:
—
Continue to touch to more than 2
seconds.
To call the equalizer curve from memory:
—
Touch to of the equalizer curve you
wish to call from memory.
When you call an equalizer curve, its type is shown
as "USER#".
Return
Close the Parametric Equalizer screen
6
P3P1
P3P1
Store or call the equalizer curve into/from
memory
Q+
Q
-
Set a Q value
5
7
7
8
8
1
1
1
1
3
4
5
2
6
9
6
10
English 91
