English 95
Troubleshooting Guide
Some system functions are limited to control depending on your setup.
¶
The rear speakers of DTA cannot be set.
¶
The "Channel Level" of rear speakers cannot be set.
"Multi Channel" has been set to "2/0"
or "3/0" (no rear speaker setting) on
the Speaker Set Up screen (page 61).
¶
The subwoofer of DTA cannot be set.
¶
The "Channel Level" of the subwoofer cannot be set.
¶
The center speaker for DTA cannot be set.
¶
The "Channel Level" of the center speaker cannot be set.
"Sub Woofer" has been set to "Off" on
the Speaker Set Up screen (page 61).
¶
No signals can be set.
¶
The "Equalizer" cannot be set.
¶
The "Position" cannot be set.
¶
The "Car Type Setup" value cannot be set.
¶
The "Speaker Setup" value cannot be set.
¶
No crossover frequency can be set.
¶
The "Channel Level" (test signal output) cannot be set.
The Zone Control has been turned
On (page 90).
"Multi Channel" has been set to "2/0"
or "2/2" (no center speaker setting) on
the Speaker Set Up screen (page 61).
DDX7015/7045_K(En)v3.9 04.4.18 9:43 AM ページ95
