English
|
37
Manual Equalizer Control
You can adjust following Equalizer Control items.
Band Item Range
“BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB
“EFCT” Bass Effect
“ON”/ “OFF”
“BAND2” (250 Hz) “GAIN” Band level -9 –+9 dB
“BAND3” (1 kHz) “GAIN” Band level -9 –+9 dB
“BAND4” (4 kHz) “GAIN” Band level -9 –+9 dB
“BAND5” (16 kHz) “GAIN” Band level -9 –+9 dB
( : Factory setting)
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Manual Equalizer Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Equalizer” > “Manual Equalizer”.
4
Select the item you want to set
Operation type Operation
Selects the item. Turn the [VOL] knob.
Adjust each item. Press the [
4
] or [
¢
] button.
Set the value Press the [VOL] button.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• When “iPod” is selected in the section <Preset Equalizer
curve Select> (page 37), Manual Equalizer Control is
disabled.
• You can select for each source.
Preset Equalizer curve Select
You can select following Equalizer curve.
Display Equalizer curve
“Natural” Natural
“User” User*
“Rock” Rock
“Pops” Pops
“Easy” Easy
“Top 40” Top 40
“Jazz” Jazz
“Game” Game
“iPod” iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
( : Factory setting)
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Equalizer” > “Preset Equalizer”.
4
Select the Equalizer curve
Press the [4] or [¢] button.
✍ Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1. Enter iPod Equalizer mode
Press the [VOL] knob.
2. Select the iPod Equalizer curve
Press the [4] or [¢] button and press it
when the desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can select for each source.
