GS2 Display—RTK
OUO6050,0000C20 –19–17OCT07–1/2
Vehicle
PC9595 –UN–09NOV06
StarFire - RTK
A—Operating Mode Vehicle C—Network ID D—Radio/Repeater E—Status
B—Radio Channel
IMPORTANT: Base station receiver and vehicle
receiver must be setup before
operating RTK. See RTK Setup
sections.
NOTE: Check that base station, vehicle, and repeater
have same Frequency, Network ID and Time
Slot.
Press: MENU button >> STARFIRE iTC button >>
RTK softkey >> OPERATING MODE drop down
box >> VEHICLE
When vehicle receiver is powered-up, No GPS, No Diff
will be displayed on Guidance View or home page
screen until an initial position is determined. When
base station transmits correction signal, 3D RTK will
be displayed.
20-3
121907
PN=46
Continued on next page
