MATERIAL CODE
[A] = Aluminum
[B] = Nitrile
[C] = Carbon Steel
[Co] = Copper
[SP] = Santoprene
[SS] = Stainless Steel
[T] =
PARTS LIST / PP30A-X-X FLUID SECTION
FLUID SECTION SERVICE KITS (637303-XX)
L
L L
L
Ln
Ln
Ln
n
L
n Air Motor Kit parts, see pages 8 and 9.
FLUID SECTION DISASSEMBLY
1. Remove (61) outlet manifold, (60) inlet manifold.
2. Remove (22) balls and (21) seats.
3. Remove (15) fluid caps.
4. Remove the (6) diaphragm washer, (7) diaphragms, and (5) backup
washer.
NOTE: Do not scratch or mar the surface of (1) diaphragm rod.
FLUID SECTION REASSEMBLY
S Reassemble in reverse order. Refer to the torque requirements on
page 7.
S Clean and inspect all parts. Replace worn or damaged parts with
new parts as required.
S Lubricate (1) diaphragm rod and (144) U" cups with LubriplateR
FMLĆ2 grease (94276 grease packet is included in service kit).
S ReĆcheck torque settings after pump has been reĆstarted and run a
while.
