32
12
HM-134 REMOTE-CONTROL MICROPHONE
■ Channel selection
ïï
Channel 16
q Push [16•C] to select Channel
16.
w Push [DIAL] to return to the con-
dition before selecting Channel
16, or push [Y] or [Z] to select
operating channel.
•Output power turns to “25W” auto-
matically, whenever Channel 16 is
selected.
ïï
Call channel
q Push and hold [16•C] for 1 sec.
to select call channel.
w Push [DIAL] to return to the con-
dition before selecting call chan-
nel, or push [Y] or [Z] to select
operating channel.
ïï
U.S.A. and International channels
q Push [DIAL] to select regular channel.
w While pushing and holding [H/L], push [DIAL] to select
channel group.
•U.S.A. or International can be selected in sequence.
DIAL
Push and hold
then push
U.S.A. channels
International channels
01 IC-M503-(1).qxd 01.12.17 5:00 PM Page 32 (1,1)
