11
2
BASIC OPERATION
t Push [CH Up] or [CH Down] to input the ‘hour’ data for
wake up time. After inputting, push [Clock] to set.
•The‘minutes’digitblinks.
y Push [CH Up] or [CH Down] to input the ‘minutes’ data for
wake up time. After inputting, push [Clock] to set.
u Push and hold [Clock] for 1 sec. to exit the clock set
mode.
•Returntothestand-bymode.
n Sleep function
The sleep function allows the transceiver to be automatically
turned OFF according to the sleep time setting.
q Push and hold [Clock] for 1 sec. to enter the clock set
mode.
•“WAKEUP”isindicated.
w Push [Clock] several times to select “SLEEP.”
e Push [CH Up] or [CH Down] to select “ON” or “ON EXCPT
EMR” to turn the sleep function ON.
•When“ONEXCPTEMER”isselected,thetransceiverwillbe
automatically turned OFF at the sleep time. However, during the
emergency mode, the sleep function will not function, even if the
sleep time period starts.
r Push [Clock] to set, and select “SLEEP TIME.”
