A SERVICE OF

logo

18
P/N 214954E 01/04
47
39
44
44
28
Install upper elevator tubes (43) to triangle plates (45) as shown. Then, install handle
assembly to lower elevator tubes (40) using bolt (47), spacers (44), and nut (39) as
shown.
Before going on to
next step, set
adjustable system
assembly to the 10’
(3.05 m) setting.
NOTE:
IMPORTANT!:
DO NOT OVER
TIGHTEN
40
47
38
40
39
43
38
45
43
20
21.
Install handle assembly to lower
elevator tubes (40) using bolt (47),
spacers (44), and nut (39) as shown.