Chapter 5 Instruction Specifications
5-141
Item number FUN instructions-15 Name Pulse frequency output setting changes
Ladder format Condition code
Processing time (µs)
Remark
R7F4 R7F3 R7F2 R7F1 R7F0
Average Maximum
FUN 150 (s) DER ERR SD V C
↕
zzzz
Instruction format Number of steps
217
Condition Steps
FUN 150 (s) — 3
Bit Word Double word
Usable I/O
XY
R,
M
TD, SS,
CU, CT WX WY
WR,
WM TC DX DY
DR,
DM
Constant
Other
s
Argument (Pulse
number)
{
s+1
Argument (Frequency
value)
{
s+2
Argument (Number of
output pulses)
{
Function
Pulse output number: H01 to H04
Change specification: H00: Sets the frequency value and
number of pulse output,
H01: Sets the frequency value
only,
H02: Sets the number of pulse
output
Frequency: 10 to 5000 (Hz)
* The maximum frequency of 5000 Hz represents the total of
all pulse output frequencies.
* If the frequency value is set to less than 10 Hz, it is
internally changed to 10 Hz. The S parameter is also
rewritten.
Number of output pulses: H0000 – HFFFF (0 to 65535)
Auto correction is executed when the value corresponding to
the CPU model is specified in WRF06B.
Caution: There will be a slight error even if correction setting
is performed.
• Pulse output is commenced at the specified frequency. Output is stopped once the number of pulses specified have been
output.
• Sets the frequency value in Hz.
Example: To set a frequency of 3 kHz, set 3000 (HBB8) as internal output.
• Sets the count for the number of output pulses.
Example: To set output of 10,000, set 10,000 (H2710) as internal output.
S
15 0
S + 1
Frequency value
S + 2
Number of pulse output
Pulse output number Change specification
FUN 150 (s)
