6
Check to make sure you have the following accessories before disposing of the packing material.
1
Remote Control Unit
CLU-49121S
(Part No.: HL02569)
2
“AAA” Size Batteries (2)
5
Stand Screws (4)
42”: M4x12, Part No.: 0M1G1740 12225 CR3
46”, 55”: M6x16, Part No.: 0M1G1760 16 47 CR3
3
Owner’s Guide
6LPXODWHGLPDJH
,PDJHPD\GLIIHUIURPDFWXDOSURGXFW
0RGHOV
LE55S606 / LE55T506 / LE55U516
µ&ODVVµ'LDJRQDO
LE46S606 / LE46T506
µ&ODVVµ'LDJRQDO
LE42S606 / LE42T506
µ&ODVVµ'LDJRQDO
Owner’s Guide
6
Stand Base
42”: Part No.: P34T1145AFL01L0100 &
P15T141210400000LH
46”, 55”: Part No.: P34T1132XAL01L0100 &
X15T828130100000BL
4
Quick Start Guide
7
Hinge cover for wall mount
42”: Part No.: P34T10160GM01X0100
46”, 55”: Part No.: P34T10320GM01X0100
8
Power Cord
Part No.: 389G202A15NJRB
For optional accessories, please access our web site at: www.hitachi.us/tv
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
The remote control operates on 2 “AAA” batteries.
1. Open the battery cover of the remote control by pushing and pulling it in the direction of the arrow.
2. Insert two new “AAA” size batteries for the remote control. When replacing old batteries, push
them towards the springs and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery compartment.
4.
springs and insert the top of the battery, the (+) side, into place. Do not force the battery into the
battery compartment.
5. Close the battery cover, and make sure the tabs rest in the corresponding holes and push down
the cover until it clicks shut.
CAUTION
Do not insert batteries with ‘+’ and ‘-’ polarities reversed as this may
cause the batteries to swell or rupture resulting in leakage.
Never mix used and new batteries in the device.
Replace all the batteries in the device at the same time.
Remove the batteries if the remote control is not going to be used for
an extended period of time.
The batteries (batteries installed) shall not be exposed to excessive
Accessories
