![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/50/a50d1a18-55db-447b-a4c9-49cfb547ac93/a50d1a18-55db-447b-a4c9-49cfb547ac93-bg1b.png)
27
Menu Operation
Advanced Setup Menu
Selected Items Setup Hints
Set Password Set the password for Advanced Setup menu. The
factory default password is “0000”.
Parental Control No Block Set to control the programmes that can be viewed
on your TV.
Rating Description
No Block Cancel the blocking.
Pre-school (P) Content is suitable for pre-schoolers
under age 5.
Children (C) Content is suitable for children age
6-7.
General (G) For general exhibition. All ages may
watch.
Parental guidance
recommended (PG)
Parental guidance is recommended
for young viewers.
Mature audience
15+ (M)
Recommended for mature audience.
Mature adult
audience 15+ (MA)
Not suitable for people under age 15.
Adult audience
strong violence 15+
(AV)
Not suitable for people under age 15.
The programmes contain violence
content.
Restricted 18+ (R) Not suitable for people under age 18.
P
C
G
PG
M
MA
AV
R
Daylight Saving On Select “On” to update the date and time for your TV.
Off
Software Update For software updating.
Restore Default Restore all settings to the default factory settings.
sA password is require to access the Advanced Setup menu.
sIn case you have forgotten your password, enter “9999” to disable lock and reset the password to factory default
password.
sYou can view blocked programmes by entering the password when prompted. This temporarily switches off the
Parental Control for the current channel until the TV is turned off, the channel is changed or a programme with a
higher rating starts.
s“Parental Control” is only available in DTV mode.
s“Software Update” is only available in TV and DTV mode.
RGB Mode Setup Menu (RGB mode only)
Selected Items Setup Hints
Auto Adjust Auto adjust the screen position, phase and clock.
H Position Adjust the horizontal position of the picture.
V Position Adjust the vertical position of the picture.
Clock Phase Adjust to minimize the blurring of the letters and
stripes on the horizontal row.
sMake sure to adjust “H Clock” before adjusting
“Clock Phase”.
H Clock Adjust to minimize the vertical stripes on the screen.
sRGB Mode Setup menu is only available in RGB mode and when receiving a compatible RGB//PC signal via RGB
Input terminal.