Table of Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . .iii
Owner’s Responsibility . . . . . . . . . . . . . . . . . . . . . .iii
Operator Protective Equipment . . . . . . . . . . . . . . . .iii
Definitions of Hazard Levels . . . . . . . . . . . . . . . . . .iii
Safety Notices and Decals . . . . . . . . . . . . . . . . . . .iv
Principle Operating Parts . . . . . . . . . . . . .iv - 1
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . .iv - 1
Operating Instructions . . . . . . . . . . . . . . . .2 - 7
Bead Loosening and Demounting . . . . . . . . . . .2 - 5
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 7
Inflation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Maintenance Instructions . . . . . . . . . . . . . . . .8
Installation Instructions . . . . . . . . . . . . . . . . . .9
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Floor Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . .9
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Safety Instructions
Owner’s Responsibility
To maintain machine and user safety, the responsibil-
ity of the owner is to read and follow these instructions:
• Follow all installation instructions.
• Make sure installation conforms to all applicable
Local, State, and Federal Codes, Rules, and
Regulations; such as State and Federal OSHA
Regulations and Electrical Codes.
• Carefully check the unit for correct initial function.
• Read and follow the safety instructions. Keep them
readily available for machine operators.
• Make certain all operators are properly trained,
know how to safely and correctly operate the unit,
and are properly supervised.
• Allow unit operation only with all parts in place and
operating safely.
• Carefully inspect the unit on a regular basis and per-
form all maintenance as required.
• Service and maintain the unit only with authorized
or approved replacement parts.
• Keep all instructions permanently with the unit and
all decals/labels/notices on the unit clean and visi-
ble.
• Do not override safety features.
ii • Important: Always read and follow the operating instructions.
NOTICE
Read entire manual before assembling,
installing, operating, or servicing this
equipment.
