A SERVICE OF

logo

Open as PDF
next previous
2
598-1338-03
WIRING
One Motion Light
Two Motion Lights
Recommended Grounding Method
Useagreenground“pigtail”(notprovided)and
twistoneendtogetherwiththebarexturewire
andtheboxgroundwire.Securewithawirecon-
nector.Securetheotherendofthe“pigtail”with
theGNDscrewontheX-bar.
CAUTION: DO NOT connect the RED wire
unless you want to control other lights from
the motion sensor (see Optional Wiring).
Black to black
White to white
Note:Allwiringshouldberuninaccordancewiththe
NationalElectricalCodethroughconduitoranother
acceptablemeans.Contact a qualified electrician
if there is any question as to the suitability of
the system.
WARNING: Turn power off at circuit breaker
or fuse.
Ifyouhavemetaljunctionbox,youmaynotneedthe
green“pigtail”.Ifyouareunsureaboutthegrounding
method,consultyourlocalbuildingcode.
Connectthexturewirestothewiresinthejunction
box.Twistthewirestogetherandsecurewithwire
connectors.
Black
White
Greenor
Bare
Light
Fixture
Black
White
Greenor
Bare
Light
Fixture
Light
Fixture