KK-S-ST-SS_INST_9-06
INSTALLATION:
1. MOUNT SIDE STEP:
• Locate (2) - ½” holes located on passenger side in the vehicle frame channel under
side door (Approx 30” apart).
• Mount the Left & Right upper mounting brackets using ½-13 x 4” bolts, washers, and
Nylock nuts through the located ½” holes in vehicle frame.
• Attach step assembly to the Left & Right upper mounting brackets using 3/8-16 x 1”
bolts, flat washers, lock washers and nuts. Be sure to attach Left/Right Fender
mounting brackets to the outer holes on the assembly.
• Tighten all hardware with the exception of hardware containing Left/Right mounting
brackets. See drawing
• With Left/Right outer mounting brackets positioned drill 5/32” holes where the
brackets meet the vehicles inner fender wall.
• Secure to vehicles inner fender using (8) ¼” x ¾” Hex head lag bolts.
Note: Extra holes are provided for alternative applications. Only (8) bolts are necessary for standard
application.
• Tighten the remaining hardware and check that step functions properly.
